Y11 PD1930AM Dead Boot Repair Flash File Tested – VIVO Hang On Logo BootLoop Fix

The term “Dead Boot” refers to a situation where the smartphone does not respond with no vibration, logo, or charge indication. A BootLoop, more precisely the “hang on logo” issue characterizes that the phone is starting up, showing the Vivo logo but never going beyond that, and at some point, it is restarting again. This cycle keeps on repeating without an end.

Besides those, in the case of Vivo Y11 PD1930AM, there are also some specific factors for this unhappy trio:

Corrupted System Software: Most times corrupted operating system is behind the majority of the problems.

Incorrect Firmware Flashing: You might end up in a bootloop if you install the wrong or incompatible firmware from an off-the-books source.

Virus or Malware Infection: Viruses or other malware can damage the system partitions which in turn prevents the OS from loading the right way.

Hardware Problems (Less Common): Even though software is the main culprit, a failing eMMC storage chip or any other motherboard part could be causing the same symptoms as a software failure.

The Solution: Flashing with a Working Flash File

Re-flashing the device with an official firmware flash file and thus reinstalling the operating system from scratch is the most successful and go-to method of repairing these software-related issues. This process called “flashing” basically substitutes the broken software with a brand new one of factory-grade quality.

Warning: Extreme Caution is Recommended

. Loss of Data: Firmware flashing will wipe the entire phone’s data including contacts, messages, photos, and applications. If at all feasible, try to save your data in recovery mode before going on.

. Not allowed Warranty: The process can void your device’s warranty if it is still valid.

. Brick Danger: You can permanently “brick” (or “hard brick”) your device if you do not follow the steps properly or if the file you use is corrupted. The risk of undertaking this repair is entirely yours.

Requirements for Y11 PD1930AM Flashing

You should get ready with the necessary items first before starting.

1.A Windows PC or Laptop: Generally, software  flashing run on Windows PC.

2. Vivo Y11 PD1930AM USB Drivers: These must be installed on the PC in order for the computer to detect the mobile device in download mode. If you can’t find the drivers then you can try to find them by searching “Vivo USB Drivers” or “Mediatek USB VCOM drivers.”

3. High-Quality USB Cable: If you still have the original cable try to use it. With a damaged cable, you may interrupt flashing, but instead of more damage, depending on the incomplete process, the flash can continue and the device will brick.

4. Flash File (Firmware) Verified as Working: Download the exactly right firmware with the verified work of the PD1930AM model. The use of a file of the other model (e.g., PD1930) will abort the flash process and possibly make the device irreversibly bricked. Be sure an Acknowledged Source of the file is for this precise model and has been tested.

5. Flasher Tool: A tool like QFIL (Qualcomm Flash Image Loader) or SP Flash Tool is usually used for Mediatek-based Vivo phones. For the PD1930AM, SP Flash Tool is mostly the preferred option. You will also need the one that is compatible with the firmware.

Step-by-Step Repair Guide

Step 1: Prepare the Flash File and Tool

Get hold of the PD1930AM firmware. It is mostly found in a compressed folder (ZIP or RAR). Unzip all the files to a folder on your desktop. Download the SP Flash Tool and get it installed.

Step 2: Launch the Flasher Tool

. Go to the folder where SP Flash Tool is located and execute flash_tool.exe as a normal Admin (Right-click >           Run  as administrator).

Step 3: Load the Scatter File

. Within SP Flash Tool, hit the “Scatter-loading” button.

. Go to the directory that contains the unzipped firmware. Locate the file with the name                                             MT6761_Android_scatter.txt or something similar. Mark it and click “Open.” The program will load the                   partitions  of the firmware automatically.

real site where you explore all type of flash file and tools

Step 4: Select the Download Mode

. Make sure that the “Download Only” option is picked out from the selection box. This is the most secure way to do a bootloop fix

Step 5: Prepare the Phone for Flashing

. Turn off the phone totally. Still, don’t connect it to the PC.

. In case of a dead boot or bootloop, you usually have to get into “Download Mode” (also called BROM mode).       Normally, this can be done by pressing and holding the Volume Down button (occasionally Volume Up, check     your firmware instructions) and then plugging in the USB cable to the PC whilst the phone is off.

Step 6: Start the Flashing Process

. With the phone prepared, tap on the “Download” button in SP Flash Tool.

. Now, take the powered-off phone to the PC using the USB cable and connect it while holding the correct         volume button.

. The tool will signify that the phone is connected by lighting the red progress bar. The red bar will be followed       by a yellow bar and then by a blue one. If the drivers have been set up properly.

Step 7: Completion and Reboot

. Don’t forget to wait for the completion of the procedure. A big green circle along with the word “OK” will show     in the tool.

. The phone has to be disconnected from the PC.

. Hold the Power button for 10-15 seconds to allow the phone to turn on.

What to Expect After Flashing

The very first start up will be much slower than it normally is (5-10 minutes). Eventually, the Vivo logo should appear followed by the usual setup screen. Vivo Y11 PD1930AM ought to be out of the bootloop and back to its original state now

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus