X6811 Scatter File V1156 Version | Zero X Pro Stock Rom Download Fix Boot Loop issue

Zero X Pro Stock ROM Is your Zero X Pro trapped in a boot loop and keeps showing its logo, restarting, or unresponsive at all? This annoying situation, usually called a reboot loop, is like the demise of the phone. But the good news is that in most situations, it’s a software issue that requires a software solution. The combination of the X6811 Scatter File and the V1156 Stock ROM is what it takes to get your device from off from the dead and bring back the original operating system. With this complete step-by-step tutorial, you will be able to accomplish the zero X Pro resurrection mission by first downloading, then using these files.

Knowing the Remedy: Scatter File and Stock ROM

Before going deep with the instructions, it is important to get a general idea of the tools you will be employing. They might look like just a couple of apps but actually, they are the bare metal system files that can change the firmware of your phone.

1. What is the X6811 Scatter File?

The Scatter File (sometimes referred as MTK_AllInOne_DA.bin or similar) is a design or a guide. It is a text file that defines the way the flashing program should put different sections of the firmware that came with the phone in its memory. In the case of the Zero X Pro, it is critical to understand the X6811 what it stands for the exact model and the way the hardware is. The wrong scatter file will destroy your device beyond repair, therefore, the correct X6811 file is indispensable.

2. What is the V1156 Stock ROM?

The Stock ROM (Read-Only Memory) is a completely official firmware that was initially on your phone. The version number V1156 indicates a particular and stable build of the latter Zero X Pro Stock ROM. The damaged or removed system files in your gadget are replaced by fresh and standard ones with flashing this ROM. Although it removes all files, it is the most effective method for solving problems like boot loop due to update failure, system file corruption, or root attempt failure.

Common Causes of the Boot Loop Issue

The boot loop quite rarely occurs without a “why”. Knowing the exact reason can even help you to stop the problem from recurring. The usual suspects are:

. Broken System Update: The main OS files may get damaged due to an unexpected power outage or unstable internet during an OTA (Over-the-Air) update.

. Rooting or Modding: Just by installing custom ROMs, kernels, or doing the wrong way your system mods can make your device unstable.

. Faulty Apps: An app that is badly designed, has deep system permissions, and is may force the OS to crash.

. Virus or Malware: Malicious software can damage necessary system partitions.

. Hardware Issues (Less Common): There are situations where a defective battery or memory that is failing is causing boot loops which are similar to software ones.

Step-by-Step Guide to Fix the Boot Loop

Warning: This way will destroy all the information on your Zero X Pro (phone numbers, texts, pictures, and so on). If you can, try to get into Recovery Mode and do a “Wipe data/factory reset” that is simple and quick. If that doesn’t work, go on with the firmware flash.

What You’ll Need:

. A Windows PC or a Laptop.

. Your Zero X Pro (X6811) phone.

. A good quality USB data cable.

. Half of the phone’s battery capacity (if possible).

. The suitable X6811 Scatter File and the V1156 Stock ROM pack.

. SPD/Unisoc Flash Tool (or ResearchDownload Tool).

. The newest USB Drivers for Unisoc/Spreadtrum chipsets.

The Flashing Process:

Step 1: Preparation on Your PC

. First, get the official firmware for X6811 V1156 and the SPD Flash Tool and download them on your PC from a reliable source.

. Move the firmware file out of its archive into any folder on your PC. The scatter file ought to be one of the unzipped items.

. Put in the USB Drivers which are needed for the type of your chipset. The installation may require you to turn off the driver signature enforcement in Windows.

Step 2: Launch the Flash Tool

. Run the SPD Flash Tool that is found in the directory (e.g., ResearchDownload.exe).

. Press the button to “Load Package” or “Choose Package”.

. Go to the place where you have unzipped the firmware, then choose the X6811 Scatter File (e.g., MTK_AllInOne_DA.bin). Now the software is loading all the firmware partitions, and you get a printed list of them.

Step 3: Initiate the Flash and Connect Your Phone

Firstly, in the tool setting ensure to select the option “Firmware Upgrade” or “Download Only”. Do not use “Format All + Download” unless it is specifically recommended as it may lead to IMEI loss.

When you click the “Start” or “Download” button the tool will move into the waiting state, waiting for a device connection.

Step 4: Connect Your Zero X Pro

. Complete the shutdown of your phone.

. Connect your turned-off Zero X Pro to the PC with the USB cable but do not press any buttons on the phone.

Step 5: The Automated Flashing Process

. While the flash tool is doing the automatic detection of your phone and hence the process of writing the firmware, you’ll be able to observe the progress being indicated for each partition (e.g., boot, system, recovery) as it is overwritten.

. This procedure can take 5-10 minutes. It is at this stage that you must not unplug the cable, access the phone, or turn off the PC.

Step 6: Completion and First Boot

. After the successful completion of the task, a big “OK” or “Success” message, usually green in color, will be displayed.

. It is now possible to unplug the phone from the USB cable without doing harm.

. Hit the power button and your device will turn on. The very first start after a firmware flashing is going to be a very slow one (up to 10 minutes). So, don’t lose your temper and try something else.

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus