X625 Hang On Logo Boot Loop Fixed Firmware V196 – Infinix Hot 7 Pro X625C MT6757 Stock Rom Flash File

fix Infinix Hot 7 Pro boot loop The “Hang On Logo” boot loop is one of those annoying problems that can cause a smartphone to be of no use to you. The owners of Infinix Hot 7 Pro (model X625C) might as well consider the problem as a device death sentence, though there is a definite and powerful solution: flashing the official Stock ROM V196 Flash File. What, why, when, and how are you going to be the next to find this solution through this recovery guide and the vital safety measures?

Understanding the Problem: The Boot Loop That Sucks

Since the solution provided is quite technical, it is always wise to comprehend the actual problem first. A boot loop is a situation whereby your phone is starting up, at the manufacturer’s logo (here the “Hang On” or Infinix logo), and then reboots continuously without ever moving on to the home screen. It is also very common that these problems arise from:

Corrupted System Files: The crash of system files due to interrupted software upgrading, incomplete application installation, or accidental deletion of system files can lead to the disruption of the booting process.

Unsuccessful Root Attempts: Rooting is a journey to the innermost realm of your system with complete control over it, but the incorrect execution of the Root process can corrupt the OS beyond repair quickly.

Unwanted Software: Although very rarely, a severe virus or malware infection may also cause harm to the Android core system.

Factory Reset Disasters: Usually, a factory reset from a weak system might be the cause of a boot loop rather than a solution.

After trying it, in most cases, the hard reboot and going into recovery mode will not work, and one will end up with a deep-level system restoration.

The Ultimate Solution: Stock ROM V196 Flash File for Infinix Hot 7 Pro X625C

The Stock ROM V196 a home-grade factory firmware bundle specifically tailored Infinix Hot 7 Pro identified  X625C model and the MT6757 chipset (f.k.a. Helio P20). In other words, it is the phone’s original operating system, but in a digital sense, it is clean and without any modifications or additions.

Installing this ROM is a form of hardware and software separation and then a reassembly having the latter as the default one in case there are any issues, basically, it is a full system installation fresh and clean without any of the existing files, fix one or more of which led to the boot loop. The proper way to:

1.Fix the Hang On Logo Boot Loop: If the whole system is re-flashed, the boot failure root source is eradicated and the phone can be accessed just like it was made the first time.

2. Unbrick Your Phone: The “bricked” device that is otherwise dead can be brought back to life with this method, thus it becomes available for use.

3. Get Rid of FRP Lock: A new ROM installation might be of great help when you forgot your Google Account credentials (FRP or Factory Reset Protection lock), but just after the particular process of flashing has been followed.

4. Go Back to Stable Software: The device returns to its normal condition if you are facing bugs, slowness, and battery drain after installing an unofficial update.

5. Upgrade or Downgrade the OS: The V196 is a certain Android build that the flashing process will allow you to set your device to the same build.

Essential Tools and Precautions Before You Begin

The process of flashing a ROM is a risky one that if done incorrectly leads to losing your data or damaging your device. prepared right way to make through unscathed.

What You’ll Need:

. A Windows PC/Laptop: The software that is used for the flashing is typically Windows-based.

. USB Data Cable: The original cable is the best choice for a stable connection.

. Infinix Hot 7 Pro X625C: The device itself should be with at least a 20-30% charge to avoid the situation when it dies during the process.

. Stock ROM V196 File: Choose a trustworthy place to download the right file. Make sure it is explicit for the X625C model and the MT6757 chipset. Incorrect file usage can lead to permanent device damage.

. SP Flash Tool: The most popular software that is used for doing hard reset on devices powered by MediaTek (MTK) chipsets is SP Flash Tool. Get the version of it that will work with your device.

. MTK VCOM Drivers: These are necessary driver components that enable your computer system to acknowledge phone in “BROM Mode” (pre-boot state) which is a situation when the phone can not normally boot.

IMPORTANT PRECAUTIONS:

. Save Your Important Files: Flashing a Stock ROM will result in wiping off of the device—meaning pictures, contacts, SMS, apps, and all the rest. you are locked recovery mode, access  files and backup. Data backup would be impossible in a boot loop malfunction; hence, being a last-resort solution allowing data loss.

. Make Sure to Get the Right Files: Are you sure that the ROM is for the X625C? The first place to look for the model number is on the phone itself or maybe under its battery.

. Stick to the Directions Rigorously: Never skip any step. We give a general guideline, but always look for the specific instructions that come with your downloaded firmware set.

The Flashing Process: A General Overview

While distinct deviations may exist, the general method is as follows:

1.Install Drivers: To your computer insert the MTK VCOM drivers.  process commonly followed turning off  driver signature enforcement on Windows 10/11.

2. Extract Files: To open the system files and the scatter-loading file from a downloaded Stock ROM file just have to unzip it.

3. Open SP Flash Tool: Open the SP Flash Tool program that runs. Click the “Scatter-loading” button and navigate to the extracted folder to select the scatter file.

4. Loading the Firmware: The application by default loads all the partitions (boot, system, recovery, etc.) that are necessary for the device.

5. Flash Mode Selection: Pick the “Download Only” option in SP Flash Tool for normal flashing.

6. Connecting the Phone: Make sure the phone is completely turned off. Don’t connect it to the PC yet. Press “Download” in SP Flash Tool. Now, turn off the phone, connect it to the PC with a USB cable. The tool automatically locate  phone and start  flashing process seen the colored progress bar.

7. Indication of the Procedural Completion: The operation is done when a green circle with the text “OK” is seen. Leave your phone out.

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus