Samsung A32 Stuck Logo & Boot Loop Repair _ Frp Reset Tested File SM-A325M _ Tested by new gsm solution

Samsung A32 boot loop repair It is important to look at the possible causes behind the Samsung A32 boot loop and stuck logo before coming up with the solution.

Failed Software Update: Corrupted or incomplete software update is the main suspect. The process disturbed by a power outage, low battery, or unstable internet, in case the operating system files are damaged leading to  malfunction the device.

System Software Corruption: Malicious apps, buggy mods, or even regular system errors can damage the necessary system files. During startup, the phone accesses these files but since they are corrupted, it cannot continue and so it is rebooted.

Factory Reset Protection (FRP) Lock Complications: In a situation where a boot loop is going to be the trouble, factory reset is the first option to be considered. However, it can be a factor that makes things worse. If the FRP lock (Google Account verification) is activated but due to the software corruption beneath you are unable to finish the process, then you have created a new failure point that causes your phone to be stuck in a reset and boot limbo simultaneously.

Hardware Failure: In very few instances, a problematic motherboard component such as the storage chip eMMC or power IC causing the issue looks like a boot loop it hardware-related. Though, the software fixes are always the first and most logical step.

The Proven Solution: FRP Reset & Firmware Reflash

The technique that tested and popularized repair communities like New GSM Solution one involving a two-step approach: going around  FRP lock and installing a new, clean firmware. This pairing deals with not only the main software corruption but also the account verification obstacle.

Disclaimer: This procedure necessitates a Windows PC, a good USB cable, and some level of technical expertise. In case you do the flashing of your phone incorrectly, it may result in a permanent “brick”. Make sure the file you are using matches precisely with your model number (SM-A325M). Just using files other models, your device damaged beyond recovery.

Part 1: Gathering Your Tools

The Correct Firmware: The firmware for Samsung that is specifically for the SM-A325M is what you need to get. Most of the time, the filename will have the regional code (e.g., CHX for Chile, TPA for Panama). It is important that you take a file from a reliable source because this file is what makes the update stable and effective for this particular fix.

Odin Tool: This the name the software used flashing inside Samsung, the public  use. The recommended version for the A32 is the one from Odin3 v3.14.4 or newer.

Samsung USB Drivers: In order for your PC to work well with your phone when it is in Download Mode, you have to install these on your PC.

A Quality USB Cable: If  cable use not good, the process interrupted and the problem become worse.

Part 2: The Step-by-Step Repair Process

Step 1: Entering Download Mode

The only way to get to it since the device is unable to perform a normal boot is through this method. Turn off the phone entirely. Then hold down both the Volume Down and Volume Up buttons and at the same time insert the USB cable into the PC. After the buttons’ powered-off warning appears, press Volume Up to take the new exit and safely enter the bluish-hued Download Mode.

Step 2: Preparing Odin and the Firmware

Open the firmware archive and then choose the file that you want to update the phone with. As a result, several files created with different extensions like AP, BL, CP, CSC, and HOME_CSC. Open the Odin tool on your PC. Load each file into the corresponding slot on the Odin tool as follows:

BL file -> BL button

AP file -> AP button (This is the largest file so it may take a few minutes to load.)

CP file -> CP button

CSC file -> CSC button (Important: Do not select the HOME_CSC file for this repair. Using the regular CSC file will do a clean flashing, erasing the Data Partition which is necessary to fix the corruption.)

The Real and Authentic website for PC Files relate to GSM field

Step 3: The Crucial FRP Reset (PIT File)

This is the step that makes the difference with the rest of the methods and is the main reason for the great success rate of this method. Sometimes you may find a PIT file (Partition Information Table) with the packages that have been tested. In Odin, click the PIT button and then select the file. This step basically repartitions the internal storage, which is a deep reset that bypasses the FRP lock because it completely redefines the user data partition. If you have a PIT file, make sure that the “Re-Partition” checkbox is ticked in Odin.

Step 4: Executing the Flash

Check once deciding all the files properly loaded in Odin. Make sure your phone is still in Download Mode, and the connection is on. Click the Start button in Odin. process initiated and a progress bar appear on phone. At this moment you not unplug the device, or use the PC any tasks.

Step 5: The Moment of Truth

Once process accomplished successfully, the log show a green “PASS!” box and phone restart automatically. The phone run the first boot process but the time will be much longer than the normal one – 5 to 15 minutes roughly. This all OK because system set up first time. Wait patiently.

Post-Repair: What to Expect

In case you have correctly followed the instructions and used the file SM-A325M.media tested, your device will turn on without giving you any trouble and will show you the initial setup screen. Since  flash unit only with CSC file (and maybe also with a PIT file),  phone now completely washed out all previous user data as well as FRP lock. You choose to either set up device new or restore a backup.

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus