X6511B Tested PAC File Fix Bootloop issue – infinix Smart 6 Hang On Logo Dead Boot Repair

X6511B Tested PAC File Fix Bootloop issue Is your Infinix Smart 6 (model X6511B) still at the boot logo, in a continuous loop or completely silent? The annoying state that is known as “bootloop” or “dead boot” is usually software-related, thus with the correct tools and know-how, one can solve it easily in most situations. Flushing the device with a verified PAC file by using a specialized tool is the best and quickest way to accomplish this. This write-up acts as a user-friendly explanation of the malfunction and the step-by-step directions of the repair.X6511B

Understanding the Problem: Why Did My Infinix Smart 6 Hang on Logo?

The occurrence of bootloop is when the corrupted system cannot finish its reboot. As a result, the device will restart repeatedly without getting to the home screen, and it may arrive at the logo animation not giving any option there. The most common reasons for this malfunction in Infinix Smart 6 are as follows:

. Failed Software Update: Basically, a system update that is interrupted due to power outage or the phone that reboots can affect the very basic system files.

. Firmware Corruption: Rooting or installing unofficial apps or mods on your device might end up damaging your firmware.

. Factory Reset Issues: Occasionally, a factory reset from the recovery menu can get interrupted in the middle, hence only an incomplete OS is left behind.

. Hardware-Software Conflict: Even though it is rarely that a hardware malfunction is the sole cause of software corruption, still, there are cases where software issues caused by defective memory manifest themselves as unbootable states.

If the normal recovery method (wiping cache/data) does not work, then the next stage should be a complete reinstallation of the software from a lower level. This makes using a PAC file flashing process the suitable step.

What is a PAC File and Why is it the Solution?

A PAC file is a downloadable firmware package for Mediatek (MTK) chipset-based smartphones, among which is the Infinix Smart 6 (X6511B). To make it very clear, a PAC file has every software piece that describes a hardware component in the device:

. Preloader: The very first piece of code that comes into function when the phone is switched on. It initializes all the components.

. SCATTER File: One important figure which directly points the software you use to the exact location in the phone’s memory where each hardware or software part are stored.

. Bootloader: It is the one that opens system access for OS to start.

Recovery Image: Contains the recovery mode atmosphere.

. System Image: The main Android operating system.

. Logo Image: The boot animation and logo the user sees when he/she starts up.

. NVRAM: Stores information of the device that includes IMEI numbers.

Performing a full and tested flashing of a PAC file is basically the same as getting a brand-new one without any issues. Thus all the corrupted parts which cause the bootloop are fixed and turned back to life again.

Prerequisites: What You’ll Need Before You Start

Warning: Flashing your device is a risky operation. If  done improperly, it permanently destroyed your phone. So, act very carefully and do the steps exactly described.

1. A Windows PC/Laptop: Flashing tools are designed to function on Windows-based devices.

2. Tested X6511B PAC File: This is the most important part. The first thing you need to do is to make sure that the PAC file is for the Infinix Smart 6, the model X6511B only. If you use file for a different model, your device irreversibly damaged. Search for trustworthy firmware sources on the internet, make sure the file is for your model and, if possible, for your area (e.g., X6511B-H6216GHK-R-OP-220927V359).

3. Mediatek USB VCOM Drivers: These drivers let your computer acknowledge the phone in the bootloader mode (even if it’s off). So, before you connect the phone, install these on your PC.

4. SP Flash Tool: This common software used to flash the firmware Mediatek devices. Get the latest version.

5. A Good Quality USB Cable: Use the original cable if you can. The poor quality of the cable can cause the flashing to stop at the middle of the process, thus your situation to become worse.

6. A Fully Charged Battery (Recommended): At least 50% battery charge on the phone is very important to avoid the phone from shutting down in the middle of the process. If the phone is completely dead and will not charge, you can still try the method as the flash tool usually powers the phone directly.

Flash the X6511B PAC File Step-By-Step Guide

Step 1: Prepare Your PC and Software

. Install the Mediatek USB VCOM drivers on your PC (you might have to turn off driver signature enforcement).

. Extract the downloaded X6511B PAC file to a folder on your desktop. One of the files should be MT6761_Android_scatter.txt.

. Unzip and launch the SP Flash Tool.

Step 2: Configure SP Flash Tool

. In SP Flash Tool, click on “Scatter-loading” and locate the folder where you have the PAC file. Choose the MT6761_Android_scatter.txt.

. Once you do that, all partitions of the firmware will be listed. Usually, the tool sets for you the needed ones. The default parameters are most of the time right.

. One of the most important things is that, from the dropdown menu at the top, you should choose “Firmware Upgrade.” This option is the one that allows a clean flash of the whole device.

Step 3: Prepare and Connect Your Phone

. Turn off your Infinix Smart 6 entirely.

. Do not connect it to the PC yet.

. In SP Flash Tool, press the “Download” button.

Step 4: The Flashing Process

. SP Flash Tool supposed to detect  phone right away and start flashing process. At the bottom, you see red progress bar, which followed by yellow one and purple one.

. Neither the cable nor  phone or the PC touched while the process going on. It take from several minutes up to some hours.

. When done, a big green circle with “OK” on your screen. This refers to the successful flashing.

Step 5: Disconnect and Reboot

. Remove the USB cable from the phone carefully and safely.

. On your Infinix Smart 6, press the Power button and hold it for 10-15 seconds.

. The phone  powered on now be patient and let it run its course.

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus