X657B Boot Loop Fixed V118 Rom – infinix Smart 5 Hang On Logo Repair Solution 2025

Infinix Smart 5 boot loop fix Is your Infinix Smart 5 (X657B) experiencing a boot loop or is it more accurate to say that it is stuck in a situation where it keeps restarting but only getting to the “Hang On” logo? Such a common software malfunction has the power to transform your phone into something that looks like a “brick.” However, there is an easy and confirmed exit from this trouble. The point of this 2025 guide is to solve the Infinix Smart 5 boot loop issue by flashing the official V118 Stock ROM. We shall walk you through the procedure of choosing the right flash file and using the SP Flash Tool to safely put the firmware on your phone so that it can be brought back to life again.

Understanding the Infinix Smart 5 “Hang On Logo” Problem

A boot loop depicts a case, wherein a faulty phone keeps going through the same process of a restart, but it never manages to load the Android interface. The device shows the Infinix logo and then stops the operation, reboots, and repeats the process infinitely. This trouble with Infinix Smart 5 X657B may be the result of:

A Software Update Gone Wrong: Besides the interrupted or failed update via Over-The-Air (OTA) process, the main cause is leaving the system files in an incomplete state.

Rogue App or System File Corruption: One problematic app or malware can side with you in destroying the necessary OS components for booting.

Unsuccessful Rooting Operations: Rooting access to the core system files. A mistake during this operation can result in the system becoming unbootable.

File System Errors: Gradual data corruption affected critical system partitions over time.

Infinix Smart 5 fix trapped  situation, recovery mode options, general, are not efficient tools fixing root cause   corruption.  clean and reliable solution   full system restore flashing  original Stock ROM.

The Certified Solution: V118 Stock ROM for Infinix Smart 5 X657B

V118 Stock ROM is factory software that is official and genuine and made just for the Infinix Smart 5 model X657B. ROM installation is not just a simple updating; it is a complete reinstallation of the software that replaces all the damaged files with Infinix Smart 5 boot loop fix the fresh ones straight from Infinix.

Going with this firmware is the only surest way to:

Getting Rid of the Boot Loop Issue Permanently: The problematic data that trigger the boot issue are removed by reformatting and rewriting the system partition.

Unbrick Your Infinix Smart 5: It makes full functionality available for a device that is completely dead and stuck on the logo.

Remove Google FRP Lock: Thus, it is also a method for solving the issue of Google Account Verification (Factory Reset Protection) that occurs after a reset.

Restore High-Level Functionality: Hence, suppose it was with slow performance, fast battery drain, or with bugs before the crash, then this will take it back to stability and will make it look like new again.

OS Upgrade/Downgrade: Just like the case with the V118 version, you get to pick and choose from the different Android builds which one is the stable one for your device.

Essential Toolkit and Precautions before Flashing

Flashing a ROM is a big change to the entire phone software and sometimes, forgetting the preparations can lead to the failure of the repair even partially in some cases. Also, charging the battery to full even if the process will only take 7-9 minutes is a good practice.

What You Will Need:

A Windows Computer: The essential software operates under Windows 7, 10, or 11.

Original USB Cable: The use of a high-quality cable is very important in avoiding disconnection errors during the flash.

Infinix Smart 5 X657B: Make sure that the battery has at least 25% of its charge so that the device will not shut down in the middle of the process.

V118 Stock ROM File: The one that is only for X657B and is downloaded from a reliable site.

SP Flash Tool: The default utility for firmware flashing on MediaTek chipsets.

MediaTek USB VCOM Drivers: Install these drivers on your PC if you want the computer to detect the phone in “BROM Mode” (the pre-boot state used for flashing).

CRITICAL WARNINGS – READ BEFORE PROCEEDING: Infinix Smart 5 boot loop fix

Complete Data Erasure: Flashing the Stock ROM will irrevocably erase all of your device data, i.e., pictures, videos, contacts, SMS, and apps. most cases, it impossible recover data the phone stuck in a boot loop situation. Therefore,  a way saving hardware.

Use the Exact Model Firmware: Flashing firmware skipping 1 of the steps or in the part of the process where the phone needs to be disconnected will result in a bricked device (example of the firmware for models X657 and X657C, respectively). Make sure the detected model number on your device is X657B.

Follow Instructions Precisely: It is strongly recommended that you follow the instructions to the letter, that is, don’t skip any steps or do it out of the flashing cycle.

Step-by-Step Guide to Flash V118 ROM in 2025

Scratch instructions and  always necessary  job done right without any regrets.

Step 1: Prepare Your Computer

First of all, you have to install the MediaTek VCOM Drivers on your computer. To successfully install it on Windows, you may need to turn off driver signature enforcement.

Unzip V118 Firmware ZIP file  you downloaded desktop your PC and create a new folder  extracted files placed.

On your computer, run the SP Flash Tool.

Step 2: Configure the Flash Tool

As facility, hit the “Scatter-loading” button in SP Flash Tool.

Locate  folder  V118 firmware files extracted. Go  the scatter file ( generally called MT6761_Android_scatter.txt or the like).

Legal and authentic guide for software engineers

Step 3: Execute the Flash Process

Once everything  set, you allowed to click on “Download” button SP flash tool. operation yet to detected, so now waiting  device to connected.

Make sure that your Infinix Smart 5 is off all the way.

Without pressing the power button, take out the USB cable and connect your phone to the computer.

The process of flashing is just beginning as the tool detects your device, and you can monitor it via a multi-colored progress bar.

Wait for the Green Circle: At the end of the process, a big green circle with “OK” inside it will pop up.

Step 4: Reboot and Set Up Your Device

In a safe manner, unplug your phone from your computer.

Turn it on by pressing and holding the power button.

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size : |
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus