Tecno BF7 Tested Flash File – Fix Hang On Logo Dead Boot Repair Pop 7 pro

The Tecno Pop 7 Pro (identified as BF7) is a notable smartphone with a small price, highly recommended for its basic functions and availability. Nevertheless, it, like any other sophisticated electronic device, can fall victim to software corruption.

How to Fix the Tecno BF7 Flash File for the Hang-on-Logo and Dead Boot Problem?

When simple fixes such as a forced restart and recovery mode do not work, the best answer is maybe a software restoration process called “flashing.” The article points out the role that a Tecno BF7 tested flash file plays, in brief, to bring back your phone to life.

Figuring out the problem: What makes the BF7 hang or get stuck?

Before getting into the solution, it is important to know the causes of these issues. Hanging on logo or dead boot is not a hardware failure in its early stage hardly ever. Instead, it is almost always an indication of significant software corruption inside the device’s firmware. The telecom company’s most common errors are:

1 Failed Software Update: Interruption in the middle of an update over the air (OTA)—power failure, unstable internet, device restart—could corrupt the main system files and leave the phone in a state that is not bootable.

2 Rooting or Custom ROMs: Rooting or attempting to install a custom ROM can be sometimes unsuccessful.

3 Malware or Virus Infection: Malicious software can destroy the essential components of the operating system thus the machine cannot be properly installed.

4 Factory Reset Errors: A situation could happen when even a factory reset from the recovery menu fails and the data partition becomes corrupted, consequently, a boot process is terminated.

What is a Tecno BF7 Tested Flash File?

The word “tested” is the most important feature of the whole thing. In the realm of smartphone repair, an untested flash file is a cause of more problems.

1 Model Compatibility: The file created only  Tecno BF7/Pop 7 Pro; hence guaranteed  line with the device’s hardware specifications.

2 Functionality: If after flashing, all the features i.e. Wi-Fi, Bluetooth, camera, sensors etc. will work as they should do without any bugs caused by the firmware itself.

3 Stability: The gadget will be back to its original, stable, out-of-the-box software state.

The Flashing Process: Tools and Precautions

The process happened roughly like this:

1 Set up the Phone: The device must be completely off. This already done  dead boot device. Check the flash file instructions exact steps.

2 Flash Load the Scatter File: The file with flash file directory called MTXXXX_Android_scatter.txt. The data in this file provides the SP Flash Tool with information firmware laid out in the memory of the phone. The tool  loaded with this scatter file.  A progress bar show the status.

At the time the process ends with a green tick, you can unplug the phone and turn it on. The first boot shall be slower than normal (up to 5-10 minutes).

Download Link: HERE
Your File Password: NewGSMSolution.com
File Version & Size :
File type: compressed/Zip & RAR (Use 7zip or WINRAR to unzip file)
Support OS: All Windows (32-64Bit)
Upload By: Ghulam Sarwar
Virus Status: 100% Safe Scanned By Avast Antivirus